Uni Lift 5000 NT Plus AMS² inground

The hydraulic scissor lift UNI LIFT 5000 NT Plus AMS² Unterflur with a lifting capacity of 5000 kg is such a versatile lift that it takes a central place in thousands of automotive service operations worldwide. The wide range of work that can be done with the UNI LIFT 5000 NT Plus AMS² Unterflur ranges from wheel alignment, test technology, tyre service, check in inspection to underbody repairs and maintenance. Equipped with an alignment set including double sliding plate and wheel-free jack (RFH), the UNI LIFT 5000 NT Plus AMS² Unterflur can literally be used anytime and anywhere. In addition, it has fast lifting and lowering times, requires little space thanks to the low rails and short ramps, lifts to a comfortable maximum height of 1907 mm and is flexible in its installation width. The wheel alignment set integrated into the rails of the lift for precise wheel alignment consists of double sliding plates fitted at the rear of the rails and recesses for turntables in the front area. The mechanical safety ratchet attached to the scissors guarantees perfect stability during wheel alignment.

The wheel-free lift allows free access to the wheels of the vehicle in no time at all. By simply changing a switch on the control column, the operator can switch between the lift of the wheel-free jack and the lift as a whole.

The UNI LIFT 5000 NT Plus AMS² Unterflur can be easily retrofitted with the JAX 2000, JAX 2600 or JAX 3200 axle lifts or with LED lighting on the rails, thus adapting to the development of your workshop for a long time to come.

• Lifting time: 35 Seconds / lowering time29 Seconds
• Capacity: 5000 kg
• Lifting height of 1907 mm
• Integriertes Achsmess-Set mit doppelten Schiebeplatten und Aussparungen für Drehteller
• Fast lifting wheel free lift (RFH) for all work on tyres and wheels
• Mechanical lock guarantees perfect stability for testing
• Space-saving: Low rails and short drive-on ramps
• Flexible installation width
• Retrofittable with axle lifts and lights
• 360° access
• Can also be installed on the floor: Uni Lift 5000 NT Plus AMS²
• Developed and manufactured in Germany

All Nussbaum hydraulic scissor lifts are equipped with two redundant hydraulic circuits as standard: Nussbaum-s patented hydraulic technology NT. The NT technology controls the perfect synchronisation of the four cylinders of the NT system, which are driven in two independent, redundant hydraulic circuits by a powerful and low-noise suboil motor.

The control unit of the UNI LIFT 5000 NT Plus AMS² Unterflur is equipped with a main switch and protected pushbuttons and can be positioned at various distances from the lift. The UNI LIFT 5000 NT Plus AMS² Unterflur has no fixed connections between the platforms and can therefore be installed in different installation widths as required.

Would you like to install your scissor lift on the workshop floor? Click here for the above-ground version: Uni Lift 5000 NT Plus AMS²

The low power consumption and low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The scissors and platforms are welded in Nussbaum's own state-of-the-art welding machines, shot-peened and then powder-coated blau Your lift is thus protected against dirt and weather in the long term.