• 0

Smart Lift 2.35 SL MM

Electromechanical 2 column lift with spindle and Mini Max arms

Smart Lift 2.35 SL MM

Item No:SL235.6000140D-5001
Smart Lift 2.35 SL MM
2 post lift Smart Lift 2 35 SL MM f RAL5001 blue
2 post lift Smart Lift 2 35 SL MM s RAL5001 blue
MiniMax 002
MiniMax 005
Customize Compare
Brief description
Item No: SL235.6000140D-5001
Lifting capacity: 3500 kg
Type 2 post lift
Color Blue

Smart Lift 2.35 SL MM

The electromechanical 2 column lift Smart Lift 2.35 SL MM with spindle, a load capacity of 3500 kg and asymmetrical 2-times telescopic arms is the ideal lift for the price-conscious and demanding car workshop. With its low minimum height and flexible installation width, it fits into any car workshop. The simple cable connection between the columns can either be installed in the floor or via a simple, height-adjustable cable bridge at the top between the columns. The Mini Max support plates allow easy access to the pick-up points of lowered vehicles, vehicles with deep-drawn side skirts or off-road vehicles. The support plates can be conveniently raised to the subfloor by foot after swiveling in.

  • Lifting time and lowering time: [AttributeShortCode,attribute=Hub-/Lowering time,attributeid=88] seconds
  • Load capacity: 3500 kg
  • Adjustable in width and height, low minimum space requirement
  • Ideal for low ceiling heights with minimum height of only [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm
  • Height-adjustable Mini Max arms with simple foot control
  • Compressed air connection and 220 V socket as standard integrated into the column
  • High quality: each unit is individually tested under load before shipment
  • Developed and manufactured in Germany

The Nussbaum Smart-Lift series has proven itself for over 20 years. Today, more than 100,000 Smart Lift lifts are available worldwide to assist car mechanics in their everyday work.

The spindle carrying nut system consists of a rotating spindle and a low-wear lifting nut made of high-quality Nylatron®. A second safety nut under the carrying nut additionally secures the system. The arms are secured by an automatic locking device. The lifting nut can be inspected by the user by means of an easily visible optical wear check.

The columns and support arms are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently azul powder-coated. Your lift is thus protected against dirt and weather in the long term.

Scope of delivery

Hebebühne mit Kabelbrücke (verstellbar), Asymmetrische, teleskopierbare Tragarme, 4 im Tragarm fixierte Drehteller, Energie-Set (Option): E-Set (230 V/ Druckluft) in der Bediensäule

Installation requirements

Fundamentstärke 200 mm C20/25 normale Bewehrung, 12 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set (Option), Entladung

Details
Capacity 3500 kg
RAL color RAL 5001 - blau - Blue
Coating Powder coating
Recommended installation width 3350 mm
Required ceiling height 2900 mm
Pick up pad height min 75 mm
Pick up pad height max 185 mm
Pick up pad height min 75 - 185 mm
Min length front arm 600 - 1000 mm
Min length rear arm 1000 - 1480 mm
Lifting height max. 2045 mm
Clear distance between columns min 2650 - 2770 mm
Synchronization system
Column height 2890 mm
Installation width min. 3230 - 3350 mm
Total width min 3230 - 3350 mm
Lifting/lowering time 40 sec
Clearance height min 3682 - 4133 - 4133 mm
Drive-through width column min 2650 - 2770 mm
Drive-through width lifting carriage min 2280 - 2520 mm
Total height min 3716 - 4167 mm
Motor power per column 1,5 KW
Pick up device
E-Set
Compressed air supply ja
Electrical connection (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Fuse protection
Foundation length 3750 mm
Foundation width 1600 mm
Concrete thickness 200 mm
Concrete quality C20/25
Customs tariff number 84254100

Datasheets

Data sheet 175 KB

Foundation plans

Foundation plan 107 KB
Cube foundation plan 112 KB

Inspection books

SMART LIFT 2.30 SL - 2.40 SL HYMAX S 3000 - 4000 DE EN FR ES IT 31 MB

Leaflets

Smart Lift Broschüre - Deutsch 2.2 MB
Smart Lift Brochure - English 2.2 MB
Smart Lift Panfleto - Español 2.2 MB
Smart Lift Brochure - Français 2.2 MB
Smart Lift Prospetto - Italiano 2.2 MB
1
Packaging
Product Dimensions 2960mm x 770mm x 550mm
Total weight 650kg
Stackable 3 times
Listenansicht Explosionsansicht
Bearing housing mounted Rd. 98x50 C45 Mounting part Item No: 225SL25031M
in stock
Bolt Rd. 10x22 S355J2G3 (galvanized 5-15µm) Item No: 025ALSM08039
in stock
Carrier arm symbols with shaft rings Item No: 232POW08016-ET
Delivery time on request
Clamping element VKT. 20x50 S235JR incl. galvanized Item No: 9225SL25026
Delivery time on request
Contactor DC24V / 5,7KW / 400V [27] Item No: 990842
in stock
Control unit SL RAL 5001 Item No: 232SL03009-RAL5001
low stock
Cover plate BL. 1,25x198x2760 DX 51 D+Z cpl. Item No: 240SL09008
low stock
Elastomer support Drm. 125x24 mm Item No: 901103031
in stock
Electro SL cable set (3 wires) is included with the stage Item No: 232SL03040
low stock
Engine 232 SL Electronics ELMA Item No: 232SL01003EL
in stock
Felt ring MNII raw white 62X43X8 Item No: 970658
in stock
Fuse holder for E-Set incl. fine fuse 5x20 mm 6,3A Item No: 232SL393024
in stock
Grease nipple (9AM6X1) Steel DIN 71412 M 6x1 Item No: 970020
in stock
Grooved pulley RD. 131X45 9S20K -KANBAN- Item No: 250SL02010
low stock
Hinge bolt Rd. 40x237 C45+C (galvanized) Item No: 232NSTL28016
low stock
Hose clamp 40-60 MM12,2 MM galvanized Item No: 970978
in stock
Kabelsatz SL komplett Item No: 232SL393004
low stock
Lifting + following nut with pawl cpl. f. SLE-eletr. version Item No: 232SL02018
in stock
Locking lock washer Rd100x25 42CrMo4(galvanized)-Kanban- Item No: 250SL08039
low stock
Pull rod compl. incl. pressure spring, clamping sleeve and protective cap Item No: 232NSTL28096-ET
Delivery time on request
Pulling rod compl. incl. pressure spring, clamping sleeve and protective cap Item No: 232NSTL28095-ET
low stock
Reversing switch W 151/93.1000-SO-NU Item No: 994777
in stock
Rippenband RB 17 PJ 508 Item No: 972357
low stock
Riser pipe sheet 1,5x127x985 DX51 D+Z cpl. Item No: 9225SL45073
Delivery time on request
Riser pipes 250SL sheet 2x154x1179 QSTE372 ZN r. + l. Item No: 9250SL05070SET
Delivery time on request
Rubber profile 480 MM Item No: 9225SL06003S3
Delivery time on request
sheet metal blinds 1,0x98x230 StW22 DD11 cpl. Item No: 9225SL09010
Delivery time on request
SL-Synchronized potentiometer Complete Item No: 232SL03003
Delivery time on request
Sliding block 10x20x46 PA6.6 Item No: 225SL06036
in stock
Sliding block 4 FL. 15X10X50 PA6.6 Item No: 225SL06038
in stock
Sliding block Fl. 35x45x80 PA6.6 black Item No: 225SL06033
Delivery time on request
Spindle guide cpl. Item No: 225SL62025K
low stock
Steigrohr / Querrohr kpl. galv. verzinkt für SL 2.40 Item No: 240SL05700
Delivery time on request
Steuerplatine SL ZPR 100 S mit Poti Item No: 940253
low stock
Toothed pulley NEW STL cpl. Item No: 232NSTL08013-ET
in stock
1 2 3 4 5 6 7
Base frame 2.35 SL & HLNT DT version Item No: 235SL11000-RALTON
Door deflector for attachment to lifting carriage 1 piece Item No: 232HL05083
Drive-on plates / vehicle pedestal (1 set = 4 pieces) Raise the vehicle by 50 mm - ideal for lowered vehicles. Dimensions: 700x400x50 LxWxH ­ 8,5kg/panel Item No: 235HL05130SET
Energy set for integrated in the opposite column (230 V and compressed air coupling) Item No: 225SL05092
Hose holder to screw onto the column, 1 piece. Item No: 175RG25315
Impact wrench holder for screwing onto the column, 1 piece. Item No: 225SL08278
Operating hours counter with compressed air coupling on the operating side â€" excludes energy set on the operating side. Item No: 225SL05091MB
Screw tray galvanized, set = 2 pieces . Item No: 225SL08276S
Second operation integrated in the counter column (cannot be retrofitted, can only be ordered ex works). Item No: 232SL03200GS
Smart Lift 2.35 SL MM
Play
Customize

Sign up to receive the Nussbaum Newsletter

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter hyperflow@nussbaum-group.de kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Custom Lifts GmbH - Alle Rechte vorbehalten.