Hydraulic 2-post lift with standard arms for car wash facilities
The hot-dip galvanized hydraulic 2 post lift Power Lift HL 2.40 NT W UNI with a load capacity of 4000 kg and asymmetrical telescopic arms is a version of our HL series specially developed for washing bays. With the fast lifting and lowering times as well as a minimum maintenance effort (no synchronization ropes, no pulleys, no ratchet) it is the ideal lift for daily continuous use in the wet area of every car workshop.
The Power Lift HL 2.40 NT W UNI is equipped as standard with the patented Nussbaum NT and HyperFlow® technologies and has been developed and manufactured by Nussbaum since its ; market launch in 2014 in Kehl-Bodersweier in Baden-Württemberg .
The HL NT series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifts Made in Germany. With specially developed, in-house technologies, we can provide you with an always perfect synchronisation without manual maintenance effort anbieten.
The hydraulic unit protected against dust and water jets (protection class IP 65) and the control element are mounted on the column under a metal cover and are easily accessible for maintenance. The columns and arms are perfectly protected against corrosion in the long term by hot-dip galvanizing.
The Power Lift HL 2.40 NT W UNI is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.
The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs.
Hebebühne mit asymmetrischen, teleskopierbaren Tragarmen, vier im Tragarm fixierte Drehteller, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert
Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung
|Recommended installation width||3350 mm|
|Required ceiling height||4200 mm|
|Pick up pad height min||115 mm|
|Pick up pad height max||190 mm|
|Pick up pad height min||115 - 190 mm|
|Min length front arm||600 - 1160 mm|
|Min length rear arm||1130 - 1840 mm|
|Lifting height max.||2000 mm|
|Clear distance between columns min||2646 - 2766 mm|
|Column height||4040 mm|
|Installation width min.||3230 - 3350 mm|
|Total width min||3230 - 3350 mm|
|Lifting time||26 sec|
|Lowering time||14 sec|
|Clearance height min||3957 - 4821 mm|
|Drive-through width min||2400 - 2523 mm|
|Drive-through width column min||2646 - 2766 mm|
|Drive-through width lifting carriage min||2400 - 2523 mm|
|Total height min||4040 - 4904 mm|
|Pick up device|
|Degree of protection||IP65|
|Oil quantity (approx.)||10 liter|
|Electrical connection (Ph/V/Hz)||3 Ph , 400 V , 50 Hz|
|Engine power||3 KW|
|Foundation length||1600 mm|
|Foundation width||3750 mm|
|Concrete thickness||200 mm|
|Noise level (<=)||70 db|
|Customs tariff number||84254100|
|Foundation plan||48 KB|
|Cube foundation plan||55 KB|
|Pickup point matrix||573 KB|
|POWER LIFT HL 2.40 NT WHV DE||8.1 MB|
|POWER LIFT HL 2.40 NT WHV FR||8 MB|
|POWER LIFT HL 2.40 NT WHV IT||7.9 MB|
|Power Lift HL NT Broschüre - Deutsch||1.5 MB|
|Power Lift HL NT Brochure - English||1.4 MB|
|Product Dimensions||4120mm x 800mm x 600mm|