Hydraulic 2-post lift with double-jointed arms
The hydraulic 2-post lift Power Lift HF 3S 5000 DG with a load capacity of 5000 kg and double-jointed arms is the only lift in the world with a triple safety system. It is also the ideal lift for the demanding automotive workshop serving all vehicle types, from short small cars to heavy SUVs to long wheelbase vans and vans. With the very fast lifting and lowering times, minimal maintenance (no synchronous cables, no rollers) and the automatic safety lock, it is the ideal lift for daily continuous use in a garage where flexibility and reactivity are required. With the symmetrical telescopic double-jointed arms you can lift a wide range of vehicle sizes and weight classes from Smart/BMW Mini to Mercedes-Benz Sprinter and VW Crafter with a long wheelbase.
The Power Lift HF 3S 5000 DG is equipped as standard with the patented Nussbaum technologies NT and HyperFlow® and has been developed and manufactured by Nussbaum since its market launch in 2014 in Kehl-Bodersweier in Baden-Württemberg.
The HF 3S series is the result of over 40 years of experience in the manufacturing and development of high-quality automotive lifts Made in Germany. With specially developed in-house technologies, we are the world's only lift manufacturer able to offer you a precise, variable lowering speed and perfect synchronisation without manual maintenance. The ergonomic continuously variable operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in no time at all, all with maximum safety. The main switch attached to the control column can also be secured with a padlock. The Power Lift HF 3S 5000 DG is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations. Its base frame-free design, which can be adjusted in terms of installation width and height, enables a wide variety of installation combinations and variants: With a minimum height of 4020 mm and a maximum height of 2055 mm thanks to the optional riser pipe extensions, the Power Lift HF 3S 5000 DG can be used both in workshops with low ceiling heights and to lift high vehicles such as vans and trucks to the ideal working height for you.
The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little power. The low power consumption, the constant automatic compensation of the hydraulic circuits by the HyperFlow® system and the low maintenance requirements, also thanks to the reduced number of moving parts, reduce running costs. The submerged oil motor is mounted on the control column and is easily accessible for maintenance. A compressed air connection and a 220 V socket are integrated into the control column. The arms and columns are welded in Nussbaum's own state-of-the-art welding machines, shot-peened and then powder-coated Bleu. Your lift is thus protected against dirt and weather in the long term.
The design and workmanship of the Power Lift HF 3S 5000 DG give your lift an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.
How does the Nussbaum safety lock differ from conventional safety systems?
The Nussbaum safety lock automatically secures the vehicle during the lifting process at intervals of 100 mm up to the maximum lifting height of 2055 mm. The safety lock attached to the control column allows the lift to be manually lowered into the lock. In contrast to conventional 2-post lifts with safety locks, the safety lock does not make any clicking noise during lifting and lowering, which is typical for this type of lift. The vehicle can be lowered immediately after release of the handle without having to be lifted upwards out of the lock.
Hebebühne mit Unterölaggregat an der Hubsäule, Steuerung mittels Commander Hebel, Hubsäulenverlängerung variabel einstellbar, Universal bzw. Doppelgelenktragarme, im Tragarm gesteckte Teleskopdrehteller, CE-STOP bei DG Ausführung
Fundamentstärke von min. 250mm mit Qualität min. C20/25, 14 Dübel BM16-25/100/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Hydrauliköl HLP 32 ca. 10l[newline marker]Entladung
|RAL color||RAL 5001 - Blue|
|Recommended installation width||3750 mm|
|Required ceiling height||4200 mm|
|Pick up pad height max||195 mm|
|Pick up pad height min||120 - 195 - 120 mm|
|Lifting height max.||2055 mm|
|Clear distance between columns min||2977 - 3177 mm|
|Column height||4020 mm|
|Installation width min.||3650 - 3850 mm|
|Total width min||3925 - 4450 mm|
|Lifting time||31 sec|
|Lowering time||15 sec|
|Clearance height min||3963 - 4824 mm|
|Drive-through width min||2690 - 2890 mm|
|Drive-through width column min||2977 - 3177 mm|
|Drive-through width lifting carriage min||2690 - 2890 mm|
|Total height min||4020 - 4880 mm|
|Pick up device|
|Oil quantity (approx.)||10 liter|
|Electrical connection (Ph/V/Hz)||3 Ph , 400 V , 50 Hz|
|Engine power||3 KW|
|Foundation length||1650 mm|
|Foundation width||4300 mm|
|Concrete thickness||250 mm|
|Noise level (<=)||70 db|
|Customs tariff number||84254100|
|7658 2 NB v4|
|Data sheet||159 KB|
|Cube foundation plan||55 KB|
|Pickup point matrix||176 KB|
|POWER LIFT HF 3S 5000 DE EN FR ES IT||21 MB|
|Power Lift HF 3S 5000 Prospetto - Italiano||1.7 MB|
|Power Lift HF 3S 5000 Broschüre - Deutsch||1.7 MB|
|Power Lift HF 3S 5000 Brochure - English||1.7 MB|
|Power Lift HF 3S 5000 Panfleto - Español||1.7 MB|
|Nussbaum POWER LIFT HF 3S 5000 FR WEB||1.7 MB|
|Product Dimensions||4300mm x 1150mm x 920mm|