Elevadores Turismos y Camiones
Elevador Doble Tijera
Elevador Tijera
Elevador electromecánico 2 col.

Power Lift HF 3S 3500 OTTO MM

Hydraulic 2-post lift with triple safety system and Otto MM arms

Power Lift HF 3S 3500 OTTO MM

Código No:HLNTK235.0000160D-5001
Power Lift HF 3S 3500 OTTO MM
NB HF 3S 3500 OTTO MM f NB b
NB HF 3S 3500 OTTO MM s NB b
NB HF 3S 3500 DG OT MM d V5 b korr240519
NB HF 3S 3500 OTTO MM d b 2
Personalizado cotejar
Breve descripción
Código No: HLNTK235.0000160D-5001
Capacidad elevación: 3500 kg
Tipo 2 post lift
Color azul

Power Lift HF 3S 3500 OTTO MM

The hydraulic 2-post lift Power Lift HF 3S 3500 OTTO MM with a load capacity of 3500 kg and Otto MM arms, the world's only lift with a triple safety system. The Power Lift HF 3S 3500 OTTO MM is the ideal lift for daily continuous use in a consistently busy garage where only the best is good enough. With their fast lifting and lowering times, with its two redundant hydraulic systems and the automatic safety latch, it is the perfect blend of maximum safety and performance.

With the Otto MM arms consisting of a long 1-time telescopic double jointed arm and a short 2-time telescopic arm you can lift a wide range of vehicle sizes and weight classes. In addition, the Power Lift HF 3S 3500 OTTO MM is equipped with Mini Max pick up pads and therefore allows easy access to the pick-up points of lowered vehicles, vehicles with deep-drawn side skirts or off-road vehicles. After swiveling in, the pads can be conveniently lifted up to the underbody by foot.

  • Lifting time: 26 seconds / Lowering time [AttributeShortCode,attribute=Lowering time,attributeid=62] seconds
  • Load capacity: 3500 kg
  • Triple safety: Two redundant hydraulic circuits plus Automatic safety latch (no clacking during lifting and lowering)
  • Otto MM arms reach the mounting points of various vehicle sizes
  • Adjustable in width and height (with optional column extension)
  • Compressed air connection and 220 V socket integrated in column
  • High quality: Every power unit and every hydraulic cylinder is tested before shipment
  • Developed and manufactured in Germany

The HF 3S series is the result of over 40 years of experience in the manufacture and development of high-quality automotive lifting platforms Made in Germany. With specially developed, in-house technologies, we are the only lift manufacturer in the world that can provide you with a precise, variable lowering speed and an always perfect synchronisation without manual maintenance effort anbieten. The ergonomic, stepless operating lever Nussbaum-Commander enables sensitive lowering and allows the user to change and correct positions in the twinkling of an eye, all with maximum safety.

The Power Lift HF 3S 3500 OTTO MM is not only safe, but also exceptionally flexible and can be adapted to a wide range of workshop sizes and configurations.Their base frame-free design, adjustable in width and height, enables a wide range of installation combinations and variants:  Mit a minimum height of [AttributeShortCode,attribute=Erforderliche Deckenhöhe,attributeid=77] mm and thanks to the optional riser pipe extensions the Power Lift HF 3S 3500 OTTO MM can be used both in workshops with low ceiling heights and to lift the underbody of high vehicles such as vans and vans to the ideal working height for you.

The pulling hydraulic cylinders protect the hydraulic circuit even during intensive use and require very little energy. The low power consumption, the consistent automatic compensation of the hydraulic circuits by the HyperFlow® system and low maintenance costs, also thanks to the reduced number of moving parts, reduce running costs. The pump unit integrated in a sound-absorbing metal housing is mounted on the control column and easily accessible for maintenance work. A compressed air connection and a 220 V socket are integrated in the slave column. The arms and columns are welded in Nussbaum's own state-of-the-art welding facilities, shot-peened and subsequently Bleu powder-coated. Your lift is thus protected against dirt and weather in the long term.

The design and the processing of the Power Lift HF 3S 3500 OTTO MM give it an elegant overall appearance, which also allows your workshop to appear in the best light in direct customer contact.

How does the Nussbaum safety catch differ from conventional safety systems?

During the lifting process, the Nussbaum safety latch automatically secures the vehicle at intervals of 100 mm up to the maximum lifting height of 2045 mm. The safety switch attached to the control column allows the lift to be additionally placed manually in the latch. In contrast to conventional 2-post lifts, the safety latch does not make any clicking noise during lifting and lowering, which is typical for this type of lifts. The vehicle can be lowered immediately after release of the latch, without first having to be lifted upwards out of the latch.

Envío

Hebebühne mit asymmetrischen Tragarmen davon 2 lange mit Doppelgelenk und eine kurzer doppelt teleskopierbar, MiniMax Aufnahmen, Energie-Set: E-Set (230 V/ Druckluft) in der Bediensäule integriert

Instalación

Fundamentstärke 200mm C20/25 normale Bewehrung, 16 Dübel BM12-20/80/40 (abhängig vom Fundament, siehe Prüfbuch), Elektroanschluss 3 PH, N + PE, 400 V, 50 Hz, Absicherung 16 Amp. träge, Luftanschluss für Energie-Set, Hydrauliköl HLP32 ca. 10l, Entladung

Detalles
Capacidad 3500 kg
RAL color RAL 5001
Recubrimiento
Ancho recomendado instalación 3350 mm
Altura de recogida min 90
mm
Altura de recogida max 185 mm
Altura de recogida min 90 - 185 mm
Largo min. brazo delantero 600 - 980 mm
Largo min. brazo trasero 995 - 1823 mm
Distancia libre entre columnas min. 2566 - 2766 mm
Sistema Sincronización
Altura Columna 4040 mm
Altura elevación 2045 mm
Ancho instalación min. 3150 - 3350 mm
Ancho total min 3150 - 3350 mm
Tiempo ascenso 26 sec
Tiempo descenso 14 sec
Altura de paso min 4040 - 4904 mm
Ancho de paso min 2566 - 2766 mm
Ancho de paso entre columnas min 2566 - 2766 mm
Ancho de paso entre columnas con los carros de elevación min 2270 - 2470 mm
Altura total min 4040 mm
Dispositivo de recogida
Oil quantity (approx.) 13 liter
Alimentación eléctrica (Ph/V/Hz) 3 Ph , 400 V , 50 Hz
Potencia Motor 3 KW
Protección Fusible
Longitud cimentación 1600 mm
Ancho cimentación 3750 mm
Grossor cimentación 200 mm
Calidad cemento C20/25
Noise level (<=) 70 db
Número arancel aduanero tafífa 84254100

Ficha técnica

Datenblatt 273 KB

Modelos de elevación

Aufnahmematrix 744 KB

Libro de Inspección

POWER LIFT HF3S 2xx NT K V10 DE EN FR ES IT 26 MB

Catálogos

Power Lift HF 3S Prospetto - Italiano 2.5 MB
Power Lift HF 3S Otto Broschüre - Deutsch 1.6 MB
Power Lift HF 3S Otto Brochure - English 1.6 MB
Power Lift HF 3S Otto Panfleto - Español 1.6 MB
Power Lift HF 3S Otto Brochure - Français 1.6 MB
1
Embalaje
Dimensiones producto 1800mm x 600mm x 500mm
Peso Total 390kg
Apilable 3
1
Embalaje
Dimensiones producto 4120mm x 800mm x 600mm
Peso Total 700kg
Apilable 3 veces
Personalizado

Subscribe to our mailing list

* indicates required

NUSSBAUM GROUP verwendet die Informationen, die Sie in diesem Formular angeben, um mit Ihnen in Kontakt zu bleiben und um Produktupdates und auf Sie abgestimmtes Marketing bereitzustellen. Bitte lassen Sie uns wissen, was Sie von uns hören möchten:

Sie können Ihre Meinung jederzeit ändern, indem Sie in der Fußzeile einer E-Mail, die Sie von uns erhalten, auf den Link zum Abbestellen klicken oder uns unter hyperflow@nussbaum-group.de kontaktieren. Wir werden Ihre Informationen mit Respekt behandeln. Weitere Informationen zu unseren Datenschutzpraktiken finden Sie auf unserer Website. Indem Sie unten auf "Für Liste anmelden" klicken, stimmen Sie zu, dass wir Ihre Informationen in Übereinstimmung mit diesen Bedingungen verarbeiten dürfen.

We use Mailchimp as our marketing platform. By clicking below to subscribe, you acknowledge that your information will be transferred to Mailchimp for processing. Learn more about Mailchimp's privacy practices here.

© Nussbaum Custom Lifts GmbH - Alle Rechte vorbehalten.